reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Tapping Chuck, ER Synchro, Shank Diameter: 25 Mm, For ER Collets: 16

About The 5 mm External Dia D: 34 mm Internal Dia D1: 28 mm Overhang dimension A: 75 mm. Internal coolant supply up to 50 bar.. Application: On machining Centers with synchronised spindles

Internal coolant supply up to 50 bar. With minimum length adjustment MLA, by means of a damping element. For compensating the difference in pitch between tap and synchronised spindle. Through-coolant: yes, with max. 50 bar Tapping range: M4 M12 Length compensation by compression: 0.5 mm Length compensation by tension: 0.5 mm External Dia D: 34 mm Internal Dia D1: 28 mm Overhang dimension A: 75 mm Increases the tool life of taps/thread formers. 309399 and 309447. Optional extras: ER collets for machine taps No. Note: Do not degrease the synchro tapping chuck. For compensating the pitch tolerances of taps. Application: On machining Centers with synchronised spindles.

Machining,Collets,Chucks & Accessories,Machine Chucks

Tapping Chuck, ER Synchro, Shank Diameter: 25 Mm, For ER Collets: 16

Machining,Collets,Chucks & Accessories,Machine Chucks

Specifications of Tapping Chuck, ER Synchro, Shank Diameter: 25 Mm, For ER Collets: 16

Category
Instockinstock

Last Updated

Tapping Chuck, ER Synchro, Shank Diameter: 25 Mm, For ER Collets: 16
More Varieties

Rating :- 9.81 /10
Votes :- 1381
M3 with tapered lead chamfer on both sides for easy start to the threading action and clean swarf evacuation in the direction of cutting.
    • All adapters with a clamping screw.

    All adapters with a clamping screw.

    Interchangeable toolholders.

    • Note: Do not clamp on the area marked S!
    • 343000-343530.

    343000-343530.

    Special surface treatment, resulting in reduced tendency to edge build-up and improved chip evacuation.5 x DC.

    • 343000-343530.

    343000-343530.

    Special surface treatment, resulting in reduced tendency to edge build-up and improved chip evacuation.. Note: For suitable reducing adapters for tools with MT shanks see No.HSS Jobber Drill, Uncoated, 26 mm Recommendation: Maximum drilling depth: L2 = LC 1.