reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Short Drill Chuck, Form AD, SK 40, Clamping Range: 0.3-8mm

About The 308820, 308835. With Balluff/RFID chip bore.. Sandblasted and ground

625220: TX25 Optimum holding torques at the tool. Supplied with: Torx chuck key with T-handle for high clamping force. maximum tightening torque Md max: 14 Nm Type: slim Overhang dimension A: 70 mm External Dia D: 35 mm Spare Torx chuck key No. For clockwise and anticlockwise rotation. Maximum radial run-out 20 um. Slim design. With Balluff/RFID chip bore. 308600 308806. Sandblasted and ground. Targeted coolant transfer to tools with IC. 308820, 308835. Optional extras: Pull studs PS No. Pull stud wrenches No.

Machining,Collets,Chucks & Accessories,Drill Chucks

Short Drill Chuck, Form AD, SK 40, Clamping Range: 0.3-8mm

D1 = 0 / -0.01 mm.
Standard: DIN 69880 / VDI 3425, Blatt 2.
More from GARANT, 308820, 308835.
Search

Machining,Collets,Chucks & Accessories,Drill Chucks

Specifications of Short Drill Chuck, Form AD, SK 40, Clamping Range: 0.3-8mm

Category
Instockinstock

Last Updated

Short Drill Chuck, Form AD, SK 40, Clamping Range: 0.3-8mm
More Varieties

Rating :- 9.92 /10
Votes :- 1392
tolerance: + 0.15 / 0.05 mm.

tolerance: + 0.15 / 0.05 mm.

Carbide Hole Saw, 27 mm Suitable for Fiber-reinforced plastics GRP and CRP.

    • Values for: slots milled from solid: ap = 0.1xDxap korr side milling: ap = 0.2xDxap korr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed!

    Values for: slots milled from solid: ap = 0.1xDxap korr side milling: ap = 0.2xDxap korr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed!

    01 mm. of teeth Z: 2 Helix angle: 30 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HA to h5 No.

    • wrench length L: 320 mm Head thickness hmax: 13.5 mm

    wrench length L: 320 mm Head thickness hmax: 13.5 mm

    .Open End Wrench, 15 Deg, Black Oxidized Special Steel, 36 mm Standard: DIN 894 Material: Special steel strength 1200 1400 N/mm2. Black oxidized finish.

    • D1 = 0 / -0.01 mm.
    • Application: For reaming through holes, as the chips are evacuated in the cutting direction.

    Application: For reaming through holes, as the chips are evacuated in the cutting direction.

    The hole is accurately round and free of chatter marks. With Morse taper shank.

    • Standard: DIN 69880 / VDI 3425, Blatt 2.

    Standard: DIN 69880 / VDI 3425, Blatt 2.

    Indexable Drill Holder, Form E1, VDI 30, Bore Diameter H6: 40mm Shape: E color code for VDI shanks: VDI 30 External Dia d3: 68 mm l1 -0.2: 85 mm l2: 73 mm Cooling channel thread: M8 Application: For drilling with indexable drill with internal coolant supply..

    • Targeted coolant transfer to tools with IC.

    Targeted coolant transfer to tools with IC.

    Maximum radial run-out 20 um. 308820, 308835. Supplied with: Torx chuck key with T-handle for high clamping force.

    • D1 = 0 / -0.01 mm.

    D1 = 0 / -0.01 mm.

    Note: At greater tool overhang lengths, use a reduced value for ap! Double-relief ground 2 chamfers hollow ground for high-precision hard machining. Tolerances: Neck Dia.

    • Targeted coolant transfer to tools with IC.

    Targeted coolant transfer to tools with IC.

    Maximum radial run-out 20 um. Pull stud wrenches No. maximum tightening torque Md max: 14 Nm Type: slim Overhang dimension A: 70 mm External Dia D: 35 mm Spare Torx chuck key No.

    • D1 = 0 / -0.01 mm.

    D1 = 0 / -0.01 mm.

    Recess angle a = 16 Deg. Ds: 4 mm of teeth Z: 2 Flute length Lc: 1.g: vf = 18000 rpmx fz mm/Zx z Through-coolant: no Tolerance nominal Dia.