Cut-Resistant Gloves, 13 Ga, Gray, 2XL (11)

Mechanics Gloves, Additional Hazard Protection Impact-Resistant, Glove Style Riggers, Cut-Resistance Coverage Palm Side, ANSI/ISEA Impact Level 2, Cuff Style Slip-On, Palm Material Cotton Corded, Glove Back Material Teflon, Glove Back Color Orange, Standards ANSI 105, EN388:2016 1342BP, ANSI/ISEA Cut Level A3, Touchscreen Compatible No, 1 Pair.

125 in, Green, Plastic Clarity Clear, Tensile Strength 9,000 psi, Impact Strength 0.4 Percent, Temperature Range 40 Degrees to 190 Degrees F, Plastic Density 0.043 lb/cu in, Plastic Hardness Rockwell M95.Sheet Stock, Cast Acrylic, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.

Shelving Post, Color Gray, Finish Epoxy Coated, Material Steel, Overall Height 63 in, Overall Width 1 in, Shelf Adjustment Increments 1 in, Shelf Adjustment Type Quick-Adjust, Dry, Wet Recommended Environments, Mobility Stationary, Includes Leveling Feet No, Standards NSF.

Door Pull, Material Stainless Steel, Satin Finish, Width 5 1/2 in, Length 5 in, Mounting U Channel, Projection 5 in, Includes Sheet Metal Screws.

Enclosure NEMA Rating 12, 3R, 4, 4X, Material of Enclosure Polycarbonate, 8 in, Hinged Enclosure Cover Type, Solid / Clear Cover Clear, Closure Method Padlock Hasp, Finish Unfinished, Color Gray, IP Rating IP66, IP68, Standards cULus, UL Listed.

Milling, Series: 542 Not Applicable Square End Mill, 1/2 in Milling Dia.Square End Mill, 1/2" dia..

Soft Shackle, Lifting Capability Not for Lifting, Working Load Limit 11,200 lb, Bar Length 2 5/8 in, Bar Diameter 1 1/8 in, Breaking Strength 33,600 lbf, Material Thickness 3/8 in, Coating Type Anodized, Maximum Inside Diameter 10 in, Cover Material Nylon, Rope Material HMPE, Resistance Properties Corrosion-Resistant, UV-Resistant.

Cut-Resistant Gloves, Glove Style Knit, Knit Material Dyneema(R), ANSI/ISEA Abrasion Level Not Rated, Hand Protection Style Glove, Additional Hazard Protection None, Glove Coating Cover Palm, Double-Dipped No, Coating Type Dipped, 1 Pair.

Soft Shackle, Lifting Capability Not for Lifting, Working Load Limit 11,200 lb, Bar Length 2 5/8 in, Bar Diameter 1 1/8 in, Breaking Strength 33,600 lbf, Material Thickness 3/8 in, Coating Type Anodized, Maximum Inside Diameter 10 in, Cover Material Nylon, Rope Material HMPE, Resistance Properties Corrosion-Resistant, UV-Resistant.

Cut-Resistant Gloves, Glove Style Knit, Knit Material Dyneema(R), ANSI/ISEA Abrasion Level Not Rated, Hand Protection Style Glove, Additional Hazard Protection None, Glove Coating Cover Palm, Double-Dipped No, Coating Type Dipped, 1 Pair.