Shaft,SS,0.250 In D,6 In

78 In.

4305 12.

Tie Down Strap, Working Load Limit 1,600 lb, Color Yellow, End Type D-Ring, Tensile Strength 5,000 lb/in, Tie Down Material Polyester, Overall Width 2 in, Reinforcement Properties General Purpose, Fixed End Length 16 in, Overall Length 27 ft, Features Triangular D-Ring, Standards CVSA, FMCSA, US DOT, Adjustment Type Ratchet, Manufacturers Warranty Length Not Applicable, End Material Steel, Product Type Tie Down Strap.

005 in, Standards ASTM B133, QQ-B-575, QQ-C-502C, SAE J461, SAE J463, Temper O, Heat Treatable Yes, Heat Treatment Annealed, Rockwell Hardness B66, System of Measurement Inch, Length Tolerance +/-1 in, Maximum Temperature 1,600 Degrees F.19 in, Thickness Tolerance +/-0.

Coin Cell Battery, Battery Size 2016, Battery Chemistry Lithium, Voltage - Batteries 3V DC, Standard Battery Pack Size 1, Capacity - Batteries 90 mAh, Battery Cross-Reference 280-206, CR2016, DL2016, E-CR2016, ECR2016, FA, KECR2016-1, SB-T11, Drain Type - Battery Medium Drain, Diameter 0. -40 Degrees F, Standards ANSI/IEC, Color Code No Code 140 Degrees F, Min.788 in, Depth 0.

Fuse Rejection Kit, Current Rating 30 A, For Disconnect Switch Size 30 to 60 A, For Fuse Class Class R, For Use With Class 8538 Series D and 8738 Series E Combination Motor Starters, Maximum Voltage 600V AC, Product Type Fuse Rejection Kit.

Linear Shaft, System of Measurement Inch, Diameter 1/4 in, Shaft Type Solid Shaft, End Type Plain Ends, Core Type Solid, Overall Length 6 in, Surface Hardness - Minimum 50 HRC, Material Stainless Steel, Finish Polished, End Thread Size Not Applicable, Mounting Hole Thread Size Not Applicable, Diameter Tolerance - Minimum -0.001 in, Diameter Tolerance - Maximum 0 in, Mounting Hole Center to Center Not Applicable, Mounting Hole Center to Shaft End Not Applicable, End Thread Length Not Applicable.

Steam Trap Cover Repair Kit, Product Type Steam Trap Cover Repair Kit.

Linear Shaft, System of Measurement Inch, Diameter 1/4 in, Shaft Type Solid Shaft, End Type Plain Ends, Core Type Solid, Overall Length 6 in, Surface Hardness - Minimum 50 HRC, Material Stainless Steel, Finish Polished, End Thread Size Not Applicable, Mounting Hole Thread Size Not Applicable, Diameter Tolerance - Minimum -0.001 in, Diameter Tolerance - Maximum 0 in, Mounting Hole Center to Center Not Applicable, Mounting Hole Center to Shaft End Not Applicable, End Thread Length Not Applicable.

Steam Trap Cover Repair Kit, Product Type Steam Trap Cover Repair Kit.