Thread Forming Tap, M4-0.70, Plug, Oxide, 0 Flutes

About The 00 mm, 75 Percent Thread Drill Size 3.7, Metric Coarse, Overall Length 54.Thread Forming Tap, Thread Size M4x0.65 mm, Thread Limit D6

Thread Forming Tap, Thread Size M4x0.7, Metric Coarse, Overall Length 54.00 mm, Cobalt, Black Oxide, Right Hand, Thread Length 8.00 mm, 75 Percent Thread Drill Size 3.65 mm, Thread Limit D6

Cutting Tools,Taps,Thread Forming Taps

Countersink,2-7/8 in. L,82 deg.,3/4 in.

3/16 in

Cutting Tools,Taps,Thread Forming Taps

Specifications of Thread Forming Tap, M4-0.70, Plug, Oxide, 0 Flutes
Category
Instock	instock

Last Updated February 2nd, 2025 10:12 am

Thread Forming Tap, M4-0.70, Plug, Oxide, 0 Flutes

More Varieties

Rating :- 8.01 /10

Votes :- 1403

13.00mm HSS 120 Deg. Jobber Length Drill Bit

5118, Metric, Drill Bit Point Type X Thinning Point, Non-Coolant Through.

Thread Forming Tap, M22-2.50, Plug, V, 0 Flutes

5, Metric Coarse, Overall Length 140.Thread Forming Tap, Thread Size M22x2.

Jobber Drill Bit,#29,Carbide

Straight Flute Drill Bit, Drill Bit Size #29, 140 Degrees Drill Bit Point Angle, Material - Machining Carbide, Finish - Machining Bright (Uncoated), Decimal Equivalent 0.136, Wire, 4 Facet Point Drill Bit Point Type, Flute Length 15/16 in.

31.75 mm

00 mm Milling Dia.30 mm, Shank Dia., Cobalt, Bright (Uncoated), Weldon Flat, Length of Cut 50.

Screw Machine Drill Bit, #43 Size, 130 Degrees Point Angle, High Speed Steel, TiAlN Finish

Screw Machine Drill Bit, Drill Bit Size #43, Drill Bit Point Angle 130 Degrees , 4 Facet Point, High Speed Steel, TiAlN, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.0890.

3/16 in

Carbide End Mill,7020,3/16 D,3/4 Cut L Square End Mill, 3/16 in Milling Dia.., Carbide, Diamond, Straight, Length of Cut 3/4 in, Overall Length 2 in, Shank Dia.