reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Linear Rail,12.63 In L,0.250 W,0.625 H

About The Drilled Linear Rail, Overall Length 12.625 in, Rail Material Carbon Steel, Manufacturer Size 2, Number of Mounting Holes 5, Rail Finish Cold Roll, Rail Type Slide, System of Measurement Inch, For Use With V-Guide Wheels and Bushings, Operating Temperature - Maximum 180 Degrees F, Operating Temperature - Minimum 0 Degrees F, Mounting Hole Center to Center 3 in, Mounting Hole Center to Shaft End 1.815 in, Channel Material Steel, Series V-Guide.25 in, Overall Height 0

Drilled Linear Rail, Overall Length 12.63 in, Overall Width 0.25 in, Overall Height 0.625 in, Rail Material Carbon Steel, Manufacturer Size 2, Number of Mounting Holes 5, Rail Finish Cold Roll, Rail Type Slide, System of Measurement Inch, For Use With V-Guide Wheels and Bushings, Operating Temperature - Maximum 180 Degrees F, Operating Temperature - Minimum 0 Degrees F, Mounting Hole Center to Center 3 in, Mounting Hole Center to Shaft End 1.815 in, Channel Material Steel, Series V-Guide

Bearings,V-belts & Power Transmission Equipment,Linear Bearings & Guides,Linear Guides

Linear Rail,12.63 In L,0.250 W,0.625 H

Bearings,V-belts & Power Transmission Equipment,Linear Bearings & Guides,Linear Guides

Specifications of Linear Rail,12.63 In L,0.250 W,0.625 H

Category
Instockinstock

Last Updated

Linear Rail,12.63 In L,0.250 W,0.625 H
More Varieties

Rating :- 8.26 /10
Votes :- 1429
Angle Stock,316SS,1/4 In T,2 In Leg,7 ft

Angle Stock,316SS,1/4 In T,2 In Leg,7 ft

75 in, Leg Thickness Tolerance +/-0.

    • Flat Stock,Copper,110,1/8 x 1/2 In,6 Ft

    Flat Stock,Copper,110,1/8 x 1/2 In,6 Ft

    13 in, Thickness Tolerance +/-0.

    • Two Hose Manifold,Y Shaped,For Oxygen

    Two Hose Manifold,Y Shaped,For Oxygen

    Two Hose Manifold, Type Two Hose Manifold, Application Dual Torch Operations.

    • Rise 55 Degrees C, Enclosure Finish Epoxy Resin Varnish

    Rise 55 Degrees C, Enclosure Finish Epoxy Resin Varnish

    Control Transformer, 100 VA, Not Rated, 55°C, 120V AC, 240/480V AC Control Transformer, Input Voltage - Transformer 240V AC, 480V AC, Output Voltage - Transformer 120V AC, VA Rating - Transformer 100 VA, Protective Device None, Enclosure Style - Transformer Open, Mounting - Transformer Foot, Phase - Electrical 1, Hz - Electrical 50 Hz, 60 Hz, Temp..

    • LinShaft w/Supp Rail,Alum,1.5 In D,12 In

    LinShaft w/Supp Rail,Alum,1.5 In D,12 In

    688 in.5 in, Rail Base Overall Width 3 in, Diameter Tolerance - Maximum -0.0005 in, Support Rail Material Finish Ceramic Coated, Shaft Drilling Pre-Drilled, Shaft Hole Spacing 8 in, Shaft End to Hole 4 in, Shaft Hole Thread Size 5/16 in, Support Rail Drilling Pre-Drilled, Rail Top Width 0.

    • Linear Rail, 24.63 In L, 0.250 W, 0.625 H, Raceway: 52100 Steel

    Linear Rail, 24.63 In L, 0.250 W, 0.625 H, Raceway: 52100 Steel

    625 in, Rail Material Steel, Manufacturer Size 2, Number of Mounting Holes 9, Rail Finish Cold Roll, Rail Type Slide, System of Measurement Inch, For Use With V-Guide Wheels and Bushings, Operating Temperature - Maximum 180 Degrees F, Operating Temperature - Minimum 0 Degrees F, Mounting Hole Center to Center 3 in, Mounting Hole Center to Shaft End 1.815 in, Channel Material Steel, Series V-Guide.25 in, Overall Height 0.Drilled Linear Rail, Overall Length 24.

    • Linear Rail,12.63 In L,0.250 W,0.625 H

    Linear Rail,12.63 In L,0.250 W,0.625 H

    Drilled Linear Rail, Overall Length 12.

    • Shaft,SS,1.000 In D,12 In

    Shaft,SS,1.000 In D,12 In

    Linear Shaft, System of Measurement Inch, Diameter 1 in, Shaft Type Solid Shaft, End Type Plain Ends, Core Type Solid, Overall Length 12 in, Surface Hardness - Minimum 50 HRC, Material Stainless Steel, Finish Polished, End Thread Size Not Applicable, Mounting Hole Thread Size Not Applicable, Diameter Tolerance - Minimum -0.001 in, Diameter Tolerance - Maximum 0 in, Mounting Hole Center to Center Not Applicable, Mounting Hole Center to Shaft End Not Applicable, End Thread Length Not Applicable.

    • Linear Rail,12.63 In L,0.250 W,0.625 H

    Linear Rail,12.63 In L,0.250 W,0.625 H

    625 in, Rail Material Carbon Steel, Manufacturer Size 2, Number of Mounting Holes 5, Rail Finish Cold Roll, Rail Type Slide, System of Measurement Inch, For Use With V-Guide Wheels and Bushings, Operating Temperature - Maximum 180 Degrees F, Operating Temperature - Minimum 0 Degrees F, Mounting Hole Center to Center 3 in, Mounting Hole Center to Shaft End 1.Drilled Linear Rail, Overall Length 12.

    • Shaft,SS,1.000 In D,12 In

    Shaft,SS,1.000 In D,12 In

    001 in, Diameter Tolerance - Maximum 0 in, Mounting Hole Center to Center Not Applicable, Mounting Hole Center to Shaft End Not Applicable, End Thread Length Not Applicable.Linear Shaft, System of Measurement Inch, Diameter 1 in, Shaft Type Solid Shaft, End Type Plain Ends, Core Type Solid, Overall Length 12 in, Surface Hardness - Minimum 50 HRC, Material Stainless Steel, Finish Polished, End Thread Size Not Applicable, Mounting Hole Thread Size Not Applicable, Diameter Tolerance - Minimum -0.