reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Convertible Jet Pump, Plastic, 1/2 HP

About The 5 gpm, Flow Rate @ 50 Ft.0/4.5 gpm, Flow Rate @ 10 Ft. Lift @ 50 PSI 4

Lift @ 30 PSI 5.5 gpm, Flow Rate @ 50 Ft. Lift @ 30 PSI 8.5 gpm, Flow Rate @ 10 Ft. Suction Lift 60 ft, Body Material Thermoplastic, Motor Enclosure ODP, Discharge 1 in NPT Convertible Jet Pump, HP 1/2 hp, Rated Voltage 115/230V AC, Amps 10.0/4.8 A, Ejector Included No, Flow Rate @ 10 Ft. Lift @ 40 PSI 2.5 gpm, Max. Lift @ 30 PSI 5.6 gpm, Flow Rate @ 20 Ft. Lift @ 50 PSI 4.3 gpm, Flow Rate @ 20 Ft. Lift @ 50 PSI 4.1 gpm, Flow Rate @ 50 Ft. Lift @ 40 PSI 5.8 gpm, Flow Rate @ 10 Ft.

Well Pumps,Convertible Well Jet Pumps

Convertible Jet Pump, Plastic, 1/2 HP

Well Pumps,Convertible Well Jet Pumps

Specifications of Convertible Jet Pump, Plastic, 1/2 HP

Category
Instockinstock

Last Updated

Convertible Jet Pump, Plastic, 1/2 HP
More Varieties

Rating :- 8.2 /10
Votes :- 1424
of Speeds 1, Voltage 115/230V AC, Full Load Amps 33.0/16.5 A, 184TC Frame, Hz 60 Hz, Motor Service Factor 1.15, Max.

of Speeds 1, Voltage 115/230V AC, Full Load Amps 33.0/16.5 A, 184TC Frame, Hz 60 Hz, Motor Service Factor 1.15, Max.

General Purpose Motor, Single Phase, Motor Design Capacitor-Start/Run, 3 HP, Nameplate RPM 1,750, No.

    • 1 qt. DOT 5 Silicone Brake Fluid - Plastic Bottle

    1 qt. DOT 5 Silicone Brake Fluid - Plastic Bottle

    Silicone Brake Fluid, Base Formulation Silicone, Brake Fluid Type DOT 5, Brake Type Anti-Lock Brakes, Disc Brakes, Drum Brakes, Container Size 1 qt, Standards FMSS 116, Boiling Point 356 Degrees F, Color Purple, Container Type Bottle, Features Does not Absorb Water, Flammability Flammable, Product Form Liquid.

    • 5/16 Two Flute Routing End Mill Square 6.L

    5/16 Two Flute Routing End Mill Square 6.L

    .Solid Router Bit, Primary Material Application Composite, Spiral Upcut, Fractional Inch, 5/16 in Cutter Dia.

    • SZ-S Wedge Anchor, 18 mm Dia., 107 mm L, Steel Zinc Plated, 20 PK

    SZ-S Wedge Anchor, 18 mm Dia., 107 mm L, Steel Zinc Plated, 20 PK

    8, Finish Zinc Plated, Compatible Material Concrete, Drill Bit Size 18 mm, Minimum Installation Depth 60 mm, Minimum Material Thickness 177 51/64 mm, Ultimate Shear Strength (4,000 psi Concrete) 18,849 lb, Ultimate Tension Strength (4,000 psi Concrete) 9,988 lb, Nut Width 19 mm.

    • SZ-S Wedge Anchor, 18 mm Dia., 107 mm L, Steel Zinc Plated, 20 PK

    SZ-S Wedge Anchor, 18 mm Dia., 107 mm L, Steel Zinc Plated, 20 PK

    8, Finish Zinc Plated, Compatible Material Concrete, Drill Bit Size 18 mm, Minimum Installation Depth 60 mm, Minimum Material Thickness 177 51/64 mm, Ultimate Shear Strength (4,000 psi Concrete) 18,849 lb, Ultimate Tension Strength (4,000 psi Concrete) 9,988 lb, Nut Width 19 mm.Wedge Anchor Bolt, System of Measurement Metric, Anchor Diameter 18 mm, Thread Size M12, Overall Length 107 mm, Thread Length Not Applicable, Eyelet Hole Size Not Applicable, Material Steel, Material Grade/Class Class 8.