reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Pedestal Pump, Centrifugal, HP Req. 1/3

About The Pedestal Pump, Pump Housing Material Stainless Steel, Sized for Horsepower 1/3 hp, Flow Rate @ 10 ft of Head (Maximum) 41 gpm, Flow Rate @ 20 ft of Head (Maximum) 34 gpm, Flow Rate @ 30 ft of Head (Maximum) 25 gpm, Flow Rate @ 40 ft of Head (Maximum) 10 gpm, Maximum Feet of Head 44 ft, Discharge Type NPT, Intake Type NPT, Compatible Intake Pipe Size 1 in, Compatible Discharge Pipe Size 3/4 in, Suction Lift (Maximum) Not Applicable, Shaft Outside Diameter 5/8 in, Priming Manual, NPSHr 200 psi

Pedestal Pump, Pump Housing Material Stainless Steel, Sized for Horsepower 1/3 hp, Flow Rate @ 10 ft of Head (Maximum) 41 gpm, Flow Rate @ 20 ft of Head (Maximum) 34 gpm, Flow Rate @ 30 ft of Head (Maximum) 25 gpm, Flow Rate @ 40 ft of Head (Maximum) 10 gpm, Maximum Feet of Head 44 ft, Discharge Type NPT, Intake Type NPT, Compatible Intake Pipe Size 1 in, Compatible Discharge Pipe Size 3/4 in, Suction Lift (Maximum) Not Applicable, Shaft Outside Diameter 5/8 in, Priming Manual, NPSHr 200 psi

Centrifugal Pumps,Centrifugal Pedestal Pumps

Pedestal Pump, Centrifugal, HP Req. 1/3

More from DAYTON | Pedestal Pump, Pump Housing Material Stainless Steel, Sized For Horsepower 1/3 Hp, Flow Rate @ 10 Ft Of Head (Maximum) 41 Gpm, Flow Rate @ 20 Ft Of Head (Maximum) 34 Gpm, Flow Rate @ 30 Ft Of Head (Maximum) 25 Gpm, Flow Rate @ 40 Ft Of Head (Maximum) 10 Gpm, Maximum Feet Of Head 44 Ft, Discharge Type NPT, Intake Type NPT, Compatible Intake Pipe Size 1 In, Compatible Discharge Pipe Size 3/4 In, Suction Lift (Maximum) Not Applicable, Shaft Outside Diameter 5/8 In, Priming Manual, NPSHr 200 Psi
Search

Centrifugal Pumps,Centrifugal Pedestal Pumps

Specifications of Pedestal Pump, Centrifugal, HP Req. 1/3

Category
Instockinstock

Last Updated

Pedestal Pump, Centrifugal, HP Req. 1/3
More Varieties

Rating :- 8.12 /10
Votes :- 1413
0.1 in, Outside Dia.
    • 0.042 in, Outside Dia.

    0.042 in, Outside Dia.

    042 in ID x 0. X 12 Ft 0.093 O.042 I.

    • Coupling,Bellows Clamp,Bore 15x14 mm

    Coupling,Bellows Clamp,Bore 15x14 mm

    3 mm, Maximum Speed 10,000 RPM, Maximum Torque 28 N-m, Hub Material Aluminum, Overall Length 50.Motion Control Coupling, Bore Diameter 1 15 mm, Bore Diameter 2 14 mm, Coupling Outside Diameter 41.25 mm, Bore Type Round, Dynamic Torque Non-Reversing 14 N-m, Dynamic Torque Reversing 7 N-m.

    • 1.5 gpm Aerated Outlet, 15/16 Thread Size, Polished Chrome, Brass

    1.5 gpm Aerated Outlet, 15/16 Thread Size, Polished Chrome, Brass

    Aerated Outlet, Thread Size Type Male, Thread Size 15/16 in, Flow Rate 1.5 gpm, Flow Outlet Type Aerated, Chrome Finish.

    • LinShaft w/Supp Rail,Alum,0.5 In D,18 In

    LinShaft w/Supp Rail,Alum,0.5 In D,18 In

    0012 in, Support Rail Material Finish Ceramic Coated, Shaft Drilling Pre-Drilled, Shaft Hole Spacing 4 in, Shaft End to Hole 2 in, Shaft Hole Thread Size #6, Support Rail Drilling Pre-Drilled.0004 in, Diameter Tolerance - Minimum -0.Pre-Drilled Linear Shaft Assembly, System of Measurement Inch, Shaft Diameter 1/2 in, Shaft Length 18 in, Shaft Material Aluminum, Shaft Material Finish Ceramic Coated, Center Height 1.125 in, Rail Base Overall Width 1.

    • Flange Bearing,0.500 In Bore,1.687 In L

    Flange Bearing,0.500 In Bore,1.687 In L

    Mounted Linear Bearing, Inside Diameter 1/2 in, Outside Diameter 1 1/4 in, Flange Width 1.25 in, Material Aluminum, Lubrication Self Lubricating, Series Simplicity, Static Load Capacity 1,950 lbf, Steady State Speed 5 fps, Housing Style Single, System of Measurement Inch, Self-Alignment Self-Aligning, Maximum Operating Temperature 400 Degrees F, Minimum Operating Temperature -400 Degrees F.63 in, Overall Length 1 11/16 in, Dynamic Load Capacity 1,950 lbf, Flange Thickness 0.

    • Pedestal Pump, Centrifugal, HP Req. 1/3

    Pedestal Pump, Centrifugal, HP Req. 1/3

    Pedestal Pump, Pump Housing Material Stainless Steel, Sized for Horsepower 1/3 hp, Flow Rate @ 10 ft of Head (Maximum) 41 gpm, Flow Rate @ 20 ft of Head (Maximum) 34 gpm, Flow Rate @ 30 ft of Head (Maximum) 25 gpm, Flow Rate @ 40 ft of Head (Maximum) 10 gpm, Maximum Feet of Head 44 ft, Discharge Type NPT, Intake Type NPT, Compatible Intake Pipe Size 1 in, Compatible Discharge Pipe Size 3/4 in, Suction Lift (Maximum) Not Applicable, Shaft Outside Diameter 5/8 in, Priming Manual, NPSHr 200 psi.

    • 0.1880 in, Plunger Projection 0.07 in, Mounting Type Press Fit, Body Length 0.48 in, Final Nose Force 7 lbf, Flange Thickness 0.044 in, Initial Nose Force 3 lbf, Overall Length 0.55 in, With Flange Yes, Application Often Used To Raise or Eject Parts, Body Finish Black Oxide, Body Material Steel, Flange Dia.
    • Pedestal Pump, Centrifugal, HP Req. 1/3

    Pedestal Pump, Centrifugal, HP Req. 1/3

    Pedestal Pump, Pump Housing Material Stainless Steel, Sized for Horsepower 1/3 hp, Flow Rate @ 10 ft of Head (Maximum) 41 gpm, Flow Rate @ 20 ft of Head (Maximum) 34 gpm, Flow Rate @ 30 ft of Head (Maximum) 25 gpm, Flow Rate @ 40 ft of Head (Maximum) 10 gpm, Maximum Feet of Head 44 ft, Discharge Type NPT, Intake Type NPT, Compatible Intake Pipe Size 1 in, Compatible Discharge Pipe Size 3/4 in, Suction Lift (Maximum) Not Applicable, Shaft Outside Diameter 5/8 in, Priming Manual, NPSHr 200 psi.

    • 0.1880 in, Plunger Projection 0.07 in, Mounting Type Press Fit, Body Length 0.48 in, Final Nose Force 7 lbf, Flange Thickness 0.044 in, Initial Nose Force 3 lbf, Overall Length 0.55 in, With Flange Yes, Application Often Used To Raise or Eject Parts, Body Finish Black Oxide, Body Material Steel, Flange Dia.