reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

3 X 2-1/2 FNPT Galvanized Reducer

About The Reducing Coupling, Malleable Iron, Galvanized, Class Class 150, 3 in, Female, NPT, 8, 2 1/2 in, Female, NPT, 8

Reducing Coupling, Malleable Iron, Galvanized, Class Class 150, 3 in, Female, NPT, 8, 2 1/2 in, Female, NPT, 8

Pipes,Valves & Fittings,Fittings,Galvanized Pipe Fittings

3 X 2-1/2 FNPT Galvanized Reducer

Pipes,Valves & Fittings,Fittings,Galvanized Pipe Fittings

Specifications of 3 X 2-1/2 FNPT Galvanized Reducer

Category
Instockinstock

Last Updated

3 X 2-1/2 FNPT Galvanized Reducer
More Varieties

Rating :- 8.21 /10
Votes :- 1422
LinShaft w/Supp Rail,Alum,0.5 In D,18 In

LinShaft w/Supp Rail,Alum,0.5 In D,18 In

0012 in, Support Rail Material Finish Ceramic Coated, Shaft Drilling Pre-Drilled, Shaft Hole Spacing 4 in, Shaft End to Hole 2 in, Shaft Hole Thread Size #6, Support Rail Drilling Pre-Drilled.

    • Flange Bearing,0.500 In Bore,1.687 In L

    Flange Bearing,0.500 In Bore,1.687 In L

    63 in, Overall Length 1 11/16 in, Dynamic Load Capacity 1,950 lbf, Flange Thickness 0.Mounted Linear Bearing, Inside Diameter 1/2 in, Outside Diameter 1 1/4 in, Flange Width 1.25 in, Material Aluminum, Lubrication Self Lubricating, Series Simplicity, Static Load Capacity 1,950 lbf, Steady State Speed 5 fps, Housing Style Single, System of Measurement Inch, Self-Alignment Self-Aligning, Maximum Operating Temperature 400 Degrees F, Minimum Operating Temperature -400 Degrees F.

    • Pedestal Pump, Centrifugal, HP Req. 1/3

    Pedestal Pump, Centrifugal, HP Req. 1/3

    Pedestal Pump, Pump Housing Material Stainless Steel, Sized for Horsepower 1/3 hp, Flow Rate @ 10 ft of Head (Maximum) 41 gpm, Flow Rate @ 20 ft of Head (Maximum) 34 gpm, Flow Rate @ 30 ft of Head (Maximum) 25 gpm, Flow Rate @ 40 ft of Head (Maximum) 10 gpm, Maximum Feet of Head 44 ft, Discharge Type NPT, Intake Type NPT, Compatible Intake Pipe Size 1 in, Compatible Discharge Pipe Size 3/4 in, Suction Lift (Maximum) Not Applicable, Shaft Outside Diameter 5/8 in, Priming Manual, NPSHr 200 psi.

    • 0.1880 in, Plunger Projection 0.07 in, Mounting Type Press Fit, Body Length 0.48 in, Final Nose Force 7 lbf, Flange Thickness 0.044 in, Initial Nose Force 3 lbf, Overall Length 0.55 in, With Flange Yes, Application Often Used To Raise or Eject Parts, Body Finish Black Oxide, Body Material Steel, Flange Dia.

    0.1880 in, Plunger Projection 0.07 in, Mounting Type Press Fit, Body Length 0.48 in, Final Nose Force 7 lbf, Flange Thickness 0.044 in, Initial Nose Force 3 lbf, Overall Length 0.55 in, With Flange Yes, Application Often Used To Raise or Eject Parts, Body Finish Black Oxide, Body Material Steel, Flange Dia.

    Plunger,Press Fit,Steel,B/O,0.48,PK5 5/16 in, Plunger Finish Black Oxide, Retractable No, Package Quantity 5 Spring Plunger, Thread Size -, Nose Shape Ball, Plunger Material Stainless Steel, Plunger Dia..

    • 2 1/2 in, Height 3.25 in, Load Capacity 6,000 lb, Thread Size 5/8 In.-11, Construction 12L14 Steel, Connection Type Threaded Stud, Bolt Length 1.94 in, Finish Zinc-Plated, Swivel Angle 45 Degrees , Base Shape Round, Base -
    • Morse Taper Drift Tool,#2, #3, #4 & #5

    Morse Taper Drift Tool,#2, #3, #4 & #5

    Morse Taper Drift Tool, For Use With Drill Press and Other Machine Spindles.

    • 3 x 2-1/2 FNPT Galvanized Reducer

    3 x 2-1/2 FNPT Galvanized Reducer

    Reducing Coupling, Malleable Iron, Galvanized, Class Class 150, 3 in, Female, NPT, 8, 2 1/2 in, Female, NPT, 8.

    • 7/8 in

    7/8 in

    End Mill,Cobalt,7/8,4 FL,dbl Sq End,CC Square End Mill, 7/8 in Milling Dia.., Cobalt, Bright (Uncoated), Weldon Flat, Length of Cut 1 7/8 in, Overall Length 6 1/8 in, Shank Dia.

    • 3 x 2-1/2 FNPT Galvanized Reducer

    3 x 2-1/2 FNPT Galvanized Reducer

    Reducing Coupling, Malleable Iron, Galvanized, Class Class 150, 3 in, Female, NPT, 8, 2 1/2 in, Female, NPT, 8.

    • 7/8 in

    7/8 in

    End Mill,Cobalt,7/8,4 FL,dbl Sq End,CC Square End Mill, 7/8 in Milling Dia., Cobalt, Bright (Uncoated), Weldon Flat, Length of Cut 1 7/8 in, Overall Length 6 1/8 in, Shank Dia.