reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

1/2in-12 HSS Round Die, For Whitworth Threads To BSW Standards, Closed/Pre-Slit Form

About The 1 3/4 turns lead chamfer.Closed, pre-slit form, with tapered lead chamfer on both sides for easy start to the threading action and clean swarf evacuation in the direction of cutting. Standard: EN 22568 Threads per inch: 12 Thread Dia. 12

Closed, pre-slit form, with tapered lead chamfer on both sides for easy start to the threading action and clean swarf evacuation in the direction of cutting. Standard: EN 22568 Threads per inch: 12 Thread Dia. 12.7 mm External Dia. 38 mm Height: 14 mm 1 3/4 turns lead chamfer. Application: For Whitworth threads to BSW standard BS84 in the tolerance field medium.

Cutting Tools,Dies,Round Dies

1/2in-12 HSS Round Die, For Whitworth Threads To BSW Standards, Closed/Pre-Slit Form

Cutting Tools,Dies,Round Dies

Specifications of 1/2in-12 HSS Round Die, For Whitworth Threads To BSW Standards, Closed/Pre-Slit Form

Category
Instockinstock

Last Updated

1/2in-12 HSS Round Die, For Whitworth Threads To BSW Standards, Closed/Pre-Slit Form
More Varieties

Rating :- 9.57 /10
Votes :- 1360
20 25 mm Head Dia.

20 25 mm Head Dia.

HSS Deburring Countersink, 90 Deg, Uncoated, for Hole Diameter 20 mm to 25 mm.

    • recess: 5 mm Recess Dia.

    recess: 5 mm Recess Dia.

    Diabolo Solid Carbide Copy Slot Drill, for Hard Steels, TiAlN Coated, 0.GARANT Diabolo: Special geometry, coating and carbide for hard machining in the high-performance field. values for: copying: ap = 0.g: vf = 18000 rpmx fz mm/Zx z No.

    • 112103, 112110 and 112160 with 120 Deg tip angle for enhanced process reliability.

    112103, 112110 and 112160 with 120 Deg tip angle for enhanced process reliability.

    HSS-E Drill, Long, Uncoated, 3. For high-tensile tempered steels, including TOOLOX..

    • Note: Flute length LC = L2 + 1.5 x DC.

    Note: Flute length LC = L2 + 1.5 x DC.

    High roundness and alignment accuracy of the deep hole, thanks to 6 guide chamfers.Solid Carbide HPC Drill for Alu, Plain Shank, DLC Coated, 8.

    • Special point geometry.

    Special point geometry.

    High concentricity and long tool life..

    • Advantage: Very tight manufacturing tolerances with H7 fit can be produced without additional reaming.

    Advantage: Very tight manufacturing tolerances with H7 fit can be produced without additional reaming.

    . Drilling and reaming in a single operation.Solid Carbide HPC Drill, H7 Tolerance, TiAlN Coated, 7.

    • Standard: EN 22568 Threads per inch: 12 Thread Dia.

    Standard: EN 22568 Threads per inch: 12 Thread Dia.

    1 3/4 turns lead chamfer.7 mm External Dia. Closed, pre-slit form, with tapered lead chamfer on both sides for easy start to the threading action and clean swarf evacuation in the direction of cutting.

    • Lead taper is suitable also for blind holes.

    Lead taper is suitable also for blind holes.

    With long flutes and left-hand helix. Size 0. This ensures the highest concentricity. Version suitable for NC similar to DIN 8093 with straight shank Dia.

    • Standard: EN 22568 Threads per inch: 12 Thread Dia.
    • Lead taper is suitable also for blind holes.

    Lead taper is suitable also for blind holes.

    No need to procure special collets when using GARANT-NC reamers.98 - 20: Reamer manufacturing or cutting edge tolerance to DIN1420 for H7 bore tolerance.