reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

HSS Taper Pin Hand Reamer, Uncoated, 1.5 Mm

About The Recommendation: The pre-drilled hole is best produced using a straight shank taper pin drill No.14 mm Flute length Lc: 37 mm Overall length L: 57 mm Shank square: 2. Form B.5 mm

Conically increasing cutting edges 1 mm over 50 mm length. Application: For reaming tapered holes by hand for taper pins to ISO 2339 DIN 1, DIN 258, 1447, ISO 8736, 8737 DIN 7977, 7978. D3: 1.4 mm large Dia. Size1.2 2.5 straight flutes. D2: 2.14 mm Flute length Lc: 37 mm Overall length L: 57 mm Shank square: 2.5 mm Form A. Size3 25 helical flutes. Recommendation: The pre-drilled hole is best produced using a straight shank taper pin drill No. Application for type of drilling: for through holes small Dia. 116310. Form B.

Cutting Tools,Reamers,Taper Pin Reamers

HSS Taper Pin Hand Reamer, Uncoated, 1.5 Mm

Ultra-smooth DLC coating for wear resistance and avoidance of edge build-up.
of teeth Z: 6 No.
More from HOLEX | 116310.
Search

Cutting Tools,Reamers,Taper Pin Reamers

Specifications of HSS Taper Pin Hand Reamer, Uncoated, 1.5 Mm

Category
Instockinstock

Last Updated

HSS Taper Pin Hand Reamer, Uncoated, 1.5 Mm
More Varieties

Rating :- 8.13 /10
Votes :- 1418
With extra long shank.

With extra long shank.

1 mm Tolerance class: ISO 2X 6HX Thread pitch: 2 mm Overall length L: 220 mm Shank Dia.

    • Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    5 mm Precision ground point. With specially shaped slots. Designed for deep holes up to 10xD and materials with critical chip formation characteristics.

    • Specially matched edge honing.

    Specially matched edge honing.

    optimized substrate for hardness and toughness.

    • Note: Flute length LC = L2 + 1.5 x DC.

    Note: Flute length LC = L2 + 1.5 x DC.

    Cutting chisel edge with high centering accuracy due to strong core and special point geometry..

    • Note: Flute length LC = L2 + 1.5 x DC.

    Note: Flute length LC = L2 + 1.5 x DC.

    Diabolo Solid Carbide Coolant Through HPC Drill, Plain Shank, TiAlN Coated, 3. Cutting chisel edge with high centering accuracy due to strong core and special point geometry.