Our Brush Seaters come in 5 grades: ES EX tra Soft, FH Fine Hard, MS Medium Soft-our most popular, FS Fine Soft, and MH Medium HardBrush Seaters are used to easily and accurately seat commutator and slip ring brushes of any material.Brush Seater, 4-3/4 in X 3/4 in X 5/8 in, Grade Ms For best results, use a stone with a width equal to or greater than the width of the brush..

Repair them with the necessary Replacement Part.

.Safety first, keep your stilts in good conditionCheaper and faster than buying new stiltsFor use only with ToolPro stilts Click the second image to see location of part on a schematic. When your Stilts become worn with use, be safe.Inner Leg for TP01830 Only simple tools are required.

L.H. Dottie #3 X 3'' Phillips Power Bit (Carded)

About The Dottie #3 x 3'' Phillips Power Bit (Carded).H.DOTTIE IB3PXC L

Hand Tools,Screwdrivers and Nutdrivers,Screwdriver Bits

Specifications of L.H. Dottie #3 X 3'' Phillips Power Bit (Carded)

Compression Spring, O= .210, L= 1.38, W= .026

Compression Spring, O=1.000, L= .78, W= .052

3/4x3x3/4x6 2FL Ball Long Endmill, PowerT

1/16x1/4x1/8x1-1/2 3FL Ball Endmill, PowerT

To use the Brush Seater, hold close to the brush so that Brush Seater material will be carried under the brush.

Repair them with the necessary Replacement Part.

Dottie #3 x 3'' Phillips Power Bit (Carded)

#10-32 x 3/4 in Slotted Flat Machine Screw, Zinc Plated Carbon Steel, 100 PK

Dottie #3 x 3'' Phillips Power Bit (Carded)

#10-32 x 3/4 in Slotted Flat Machine Screw, Zinc Plated Carbon Steel, 100 PK