HSS Single-Sided Sheet Metal Drill, Uncoated, 3.1 Mm

3 mm.

6 mm Outstandingly suitable for machines with low power output and high speeds. optimized micro-geometry for increased working life and performance capability. Coating for best wear resistance even at high process temperatures.

Solid Carbide Deburring Mill, 30 Deg, TiAlN Coated, 6 mm Application: Perfectly suitable for chamfering and deburring component edges and for contouring applications.

Tolerances: Corner radius: R1 = ±0.01 mm.Diabolo Solid Carbide Torus End Mill, for Hard Steels, TiAlN Coated, 1X25 mm Recess angle a = 16 Deg.

Ds: 16 mm Corner chamfer width at 45 Deg: 0.

D1: 0.Solid Carbide Micro End Mill, DLC Coated, 1 x 25 mm Double relief ground with 2 hollow-ground chamfers. Note: At greater tool overhang lengths, use a reduced value for ap!Values for:slots milled from solid: ap = 0.

When used to drill deep holes, low feed rates and frequent drill pecks are necessary.4 mm. Note: Suitable NC spotting drills No.HSS Long Reach Jobber Drill, Uncoated, 2 mm Particularly for deep hole drilling for deep holes, repeated chip evacuation is necessary.

Application: Especially for drilling sheet metal. Dimensions similar to DIN 1897.

Vaporized from 2.

HSS Single-Sided Sheet Metal Drill, Uncoated, 3.