reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Solid Carbide Roughing End Mill For Aluminum, Coolant Through, Uncoated, 8 Mm

About The D1: 7. With through-coolant. Through-coolant: yes Tolerance nominal Dia. of teeth Z: 3 Helix angle: 30 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HB to h6 No

D1: 7.8 mm Overall length L: 63 mm Shank Dia. of teeth Z: 3 Helix angle: 30 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HB to h6 No. of teeth Z: 3 Flute length Lc: 16 mm Overhang length L1 incl. Through-coolant: yes Tolerance nominal Dia. recess: 27 mm Recess Dia. Dimensions similar to DIN 6527. Ds: 8 mm With through-coolant. d11 No. Special profile for machining non-ferrous metals. Knuckle form profile.

Cutting Tools,End Mills,Carbide End Mills

Solid Carbide Roughing End Mill For Aluminum, Coolant Through, Uncoated, 8 Mm

Cutting Tools,End Mills,Carbide End Mills

Specifications of Solid Carbide Roughing End Mill For Aluminum, Coolant Through, Uncoated, 8 Mm

Category
Instockinstock

Last Updated

Solid Carbide Roughing End Mill For Aluminum, Coolant Through, Uncoated, 8 Mm
More Varieties

Rating :- 9.63 /10
Votes :- 1365
Neck Dia.

Neck Dia.

0025 mm.

    • h10 No.

    h10 No.

    1 mm Feed fz for slot milling in short-chipping aluminium: 0. Stronger cutting edges.065 mm of teeth Z: 2 Helix angle: 45 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HB to h6 No.

    • Tolerances: Neck Dia.

    Tolerances: Neck Dia.

    With advanced DLC sp2 coating.95 mm Overall length L: 60 mm Shank Dia. of teeth Z: 2 Flute length Lc: 1.005 No.

    • Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    When used to drill deep holes, low feed rates and frequent drill pecks are necessary. Note: Suitable NC spotting drills No.

    • Vaporized surface.

    Vaporized surface.

    Extremely break-resistant due to short helix and strong core taper. Application: Especially for drilling sheet metal. Dimensions similar to DIN 1897.

    • Ds: 10 mm Feed fz for side milling in steel < 900 N/mm2: 0.05 mm

    Ds: 10 mm Feed fz for side milling in steel < 900 N/mm2: 0.05 mm

    Note: For HB shanks use order No. of teeth Z: 2 Shank: DIN 6535 HB to h6 Chamfer mill: 60 degrees No. Application: Slot milling Countersinking Milling Can also be used as a NC spotting drill. No.

    • of teeth Z: 3 Flute length Lc: 16 mm Overhang length L1 incl.

    of teeth Z: 3 Flute length Lc: 16 mm Overhang length L1 incl.

    8 mm Overall length L: 63 mm Shank Dia. Through-coolant: yes Tolerance nominal Dia. of teeth Z: 3 Helix angle: 30 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HB to h6 No.

    • Extra-short teeth for increased cutting performance values.

    Extra-short teeth for increased cutting performance values.

    Version with DLC sp2 coating.Tolerance: H7 Number of cutting edges Z: 6 Tolerance: H7 Flute length Lc: 12 mm Overhang L1: 80 mm Overall length L: 120 mm Number of cutting edges Z: 6 Shank Dia.

    • of teeth Z: 3 Flute length Lc: 16 mm Overhang length L1 incl.

    of teeth Z: 3 Flute length Lc: 16 mm Overhang length L1 incl.

    of teeth Z: 3 Helix angle: 30 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HB to h6 No.

    • Extra-short teeth for increased cutting performance values.

    Extra-short teeth for increased cutting performance values.

    Very high concentricity and process reliability due to unequal spacing of the teeth and special profile of the round chamfer width.