Nail Drive Anchor, Steel 4 PK

Shipping Box, Wall Type Single Wall, Inside Length 10 in, Inside Width 10 in, Inside Height 9 in, 10x10x9 in Inside LxWxH, 32 ECT, RSC, Outside Length 10 3/8 in, Outside Width 10 3/8 in, Outside Height 9 5/8 in, 10 3/8x10 3/8x9 5/8 in Outside LxWxH, Wall Thickness 1/8 in, Fluting Profile C Flute, Maximum Load Capacity 65 lb, Material Corrugate, Color Kraft, Post-Consumer Recyclability 100 Percent, Standards ASTM D5118, Inside Length Range 9 in to 11 in Length Shipping Boxes.

5 oz, Color Silver, Overall Length Not Applicable, Overall Width Not Applicable, Overall Depth 2 3/4 in, Gauge 20 ga, Bead Closure Closed Bead, Overall Diameter 10 3/8 in, Coating Uncoated.Cake Pan, Material Aluminum, NSF Certified No, Oven Safe Yes, Product Type Springform Cake Pan, Dishwasher Safe No, Freezer Safe No, Perforation Solid, Capacity 130.

Headed Press-Fit Drill Bushing (H), Standard Wall, Headed, Fractional Inch, 39/64 in.

Headed Press-Fit Drill Bushing (H), Thin Wall, Headed, Fractional Inch, 1 3/32 in.

106, SAE J1131, SAE J246, Fitting Connection Type Compression, Hex Size 7/16 in, Minimum Operating Temperature 40 Degrees F.Nut, Application Air, Fitting Material Brass, Maximum Operating Pressure 150 psi, Maximum Operating Temperature 200 Degrees F, Overall Length 13/32 in, Thread Size 5/16-24, Specific Fitting Shape Nut, System of Measurement Imperial, Compatible Tube Outer Diameter 3/16 in, Series NTA, Standards DOT FMVSS 571.

Male Swivel Elbow, Application Air, Fitting Side A Connection Type Push-to-Connect, Fitting Side B Connection Type MNPT, Fitting Side B Pipe Size 1/2 in, Fitting Side A Tube Outer Diameter 5/8 in, Fitting Material Brass, Fitting Thread Size 1/2, Color Gold, Includes Pre-Applied Thread Sealant No, Maximum Operating Pressure 250 psi, Maximum Operating Temperature 200 Degrees F, Overall Length 1 15/32 in, Specific Fitting Shape 90 Degrees Swivel Elbow Adapter, Release Type Button.

-10, Thread Length 1 15/16 in, Anchor Material Steel, Pin Material Steel, Finish Zinc Yellow, Head Type Flat, Head Diameter Not Applicable, Head Height Not Applicable, Nut Width Not Applicable, Washer Outside Diameter Not Applicable, Drill Bit Size 3/4 in, Minimum Installation Depth 3 1/2 in, Maximum Material Thickness 2 in, Ultimate Shear Strength (4,000 psi Concrete) Not Applicable.

Press-Fit Drill Bushing (P), Standard Wall, Headless, Fractional Inch, 21/64 in.

Hammer Drive Pin Anchor, Anchor Diameter 3/4 in, Overall Length 6 in, Thread Size 3/4 In.

Press-Fit Drill Bushing (P), Standard Wall, Headless, Fractional Inch, 21/64 in.