Pipe Tap, 3/4-14, Taper, 5 Flutes, NPT

01 Percent, Temperature Range -58 Degrees to 176 Degrees F, Plastic Hardness 70D.

02 in, Materials Cut Aluminum and Soft Alloys, Steel and Steel Alloys, Metal Cutting Type Thin Metal, Package Quantity 3.Portable Band Saw Blade, For Use With Saw Type Portable Band Saws, Primary Material Application Metal, Blade Length 44 7/8 in, Teeth per Inch 10, Blade Material Bi-Metal, Tip Material Metal, Blade Width 1/2 in, Blade Thickness 0.

225 in, Chain Number C2060H, Roller Diameter 15/32 in, Finish Plain, Pitch 1 1/2 in, Link Type Attachment, Centerline to Attachment End 0.Attachment Link, Attachment Number D-1, Attachment Type Pin, Material Steel, Chain Overall Width 1.652 in, Centerline to Hole Center 0.234 in, Lubrication SAE 10 to SAE 50, Maximum Operating Temperature 300 Degrees F, Minimum Operating Temperature 15 Degrees F, Number of Tab Holes 1, Pin Contruction Riveted Pin.

234 in, Plate Height 0.083 in, Lacing 4 x 6, Overall Length 10 ft, Pitch 5/8 in, Tensile Strength 17,600 lb/in, Hole Diameter 0.591 in, Plate Thickness 0.

Filter Element,20 Micron,10 GPM,200 PSI Pressure 200 psi, Primary Filter Removes Contaminants, Housing Type - Filters Double Length, Thread Size -, Seal Material Nitrile Hydraulic Filter Element, Micron Rating 20, Filter Media - Filters Fiberglass, Max..

3 mil, Powdered/Powder-Free Powder-Free, Silicone-Free No, Standards EN 374, Sterile/Non-Sterile Non-Sterile, Texture Grain, Texture Location Fingertips, Accelerator-Free Yes.7 mil, Latex-Free Yes, Length 12 in, Material Nitrile, Palm Thickness 4.1 mil, Disposable Glove Type Chemical-Resistant, Cleanroom, Features Extended Cuff, Finger Thickness 4.

281 in, Hex Width 5/16 in, Tensile Strength 55,000 psi, Material Quality Standards ASTM B16, System of Measurement Inch, Pack Size Small Pack, Removable Yes, Resistance Properties Corrosion Resistant, Nonmagnetic, Thread Direction Right Hand, Package Quantity 50.

Pipe and Conduit Thread Tap, Thread Size 3/4 In.-14, NPT, Overall Length 3 1/4 in, High Speed Steel, Black Oxide, Right Hand, Thread Length 1 3/8 in, 75 Percent Thread Drill Size 29/32 in, Thread Limit H7, Number of Flutes 5.

281 in, Hex Width 5/16 in, Tensile Strength 55,000 psi, Material Quality Standards ASTM B16, System of Measurement Inch, Pack Size Small Pack, Removable Yes, Resistance Properties Corrosion Resistant, Nonmagnetic, Thread Direction Right Hand, Package Quantity 50.Cap Nut, Material Grade/Class Not Graded, Material Brass, Finish Nickel Plated, Thread Size #8-32, Overall Height 0.

-14, NPT, Overall Length 3 1/4 in, High Speed Steel, Black Oxide, Right Hand, Thread Length 1 3/8 in, 75 Percent Thread Drill Size 29/32 in, Thread Limit H7, Number of Flutes 5.Pipe and Conduit Thread Tap, Thread Size 3/4 In.