Split Taper Bushing,Series Q1,1-1/4 In
About The Split Taper Bushing, Bushing Type Split Taper, Bore Bushing Series Q1, Bore Diameter 1 1/4 in, Length 2.969 in, Material Steel, Overall Diameter 4.38 in, Bolt Size Not Applicable, System of Measurement Inch, Bushing Diameter 2.125 in, SAE Grade G3000
Split Taper Bushing, Bushing Type Split Taper, Bore Bushing Series Q1, Bore Diameter 1 1/4 in, Length 2.5 in, Bolt Circle Diameter 3.38 in, Bolt Size Not Applicable, System of Measurement Inch, Bushing Diameter 2.875 in, Fastener Tightening Torque Capacity 348 in-lb, Flange Type Solid, Flange Width 17/32 in, For Shaft Type Keyed, Includes (3) Cap Screws, Keyway Height 1/8 in, Keyway Width 1/4 in, Length Less Flange 1.969 in, Material Steel, Overall Diameter 4.125 in, SAE Grade G3000
Bearings,V-belts & Power Transmission Equipment,Bushings,Tapered & QD Bushings
Split Taper Bushing,Series Q1,1-1/4 In
Bearings,V-belts & Power Transmission Equipment,Bushings,Tapered & QD Bushings
Specifications of Split Taper Bushing,Series Q1,1-1/4 In | |
|---|---|
| Category | |
| Instock | instock |
