reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Solid Carbide Micro End Mill, Diamond Coated, 1.8 X 6 Mm

About The Recess angle a = 16 Deg. Double relief ground with 2 hollow-ground chamfers. 0 / -0. For the highest demands regarding performance and precision in Fiber-reinforced composites, CRP, GRP, and graphite

D1: 1.71 mm Overall length L: 45 mm Shank Dia. Tolerances: Neck Dia. e.g: vf = 18000 rpmx fz mm/Zx z Through-coolant: no Tolerance nominal Dia. For the highest demands regarding performance and precision in Fiber-reinforced composites, CRP, GRP, and graphite. 0 / -0.005 No. of teeth Z: 2 Helix angle: 30 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HA to h5 No. Double relief ground with 2 hollow-ground chamfers. D1 = 0 / -0.01 mm. Values for: slots milled from solid: ap = 0.1xDxap korr side milling: ap = 0.2xDxap korr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed! recess: 6 mm Recess Dia. Recess angle a = 16 Deg. Extremely tight tolerances ensure maximum accuracy. of teeth Z: 2 Flute length Lc: 2.7 mm Overhang length L1 incl. Note: At greater tool overhang lengths, use a reduced value for ap! Ds: 4 mm With crystalline diamond sp3 coating.

Cutting Tools,End Mills,Carbide End Mills

Solid Carbide Micro End Mill, Diamond Coated, 1.8 X 6 Mm

Cutting Tools,End Mills,Carbide End Mills

Specifications of Solid Carbide Micro End Mill, Diamond Coated, 1.8 X 6 Mm

Category
Instockinstock

Last Updated

Solid Carbide Micro End Mill, Diamond Coated, 1.8 X 6 Mm
More Varieties

Rating :- 9.96 /10
Votes :- 1397
Application: For reaming through holes, as the chips are evacuated in the cutting direction.
    • Neck Dia.

    Neck Dia.

    . D1: 1.5 mm Overhang length L1 incl.

    • equal.

    equal.

    1 mm. Solid Carbide Drill, Extra Short, TiAlN Coated, 3. Similar to DIN 6539 extra short. TiAlN coating for even better performance.

    • 26.44 mm Overall length L: 90 mm Shank Dia.

    26.44 mm Overall length L: 90 mm Shank Dia.

    2-piece set comprising taper and plug tap. Tool material: HSS Threads per inch: 14 Thread Dia.

    • No.

    No.

    Note: Regrinding not recommended. Using special milling strategies very high rates of metal removal can be achieved.

    • For high-performance milling of aluminum materials.

    For high-performance milling of aluminum materials.

    Solid Carbide HPC Drill, Plain Shank, DLC Coated, 2.. Note: Flute length LC = L2 + 1.

    • Values for: slots milled from solid: ap = 0.1xDxap korr side milling: ap = 0.2xDxap korr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed!
    • Lead taper is suitable also for blind holes.

    Lead taper is suitable also for blind holes.

    Version suitable for NC similar to DIN 8093 with straight shank Dia. No need to procure special collets when using GARANT-NC reamers.

    • Values for: slots milled from solid: ap = 0.1xDxap korr side milling: ap = 0.2xDxap korr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed!

    Values for: slots milled from solid: ap = 0.1xDxap korr side milling: ap = 0.2xDxap korr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed!

    Ds: 4 mm D1: 1.g: vf = 18000 rpmx fz mm/Zx z Through-coolant: no Tolerance nominal Dia.71 mm Overall length L: 45 mm Shank Dia.

    • Lead taper is suitable also for blind holes.

    Lead taper is suitable also for blind holes.

    This ensures the highest concentricity.Application: For reaming through holes, as the chips are evacuated in the cutting direction. Solid Carbide Machine Reamer, TiAlN Coated, 4.004 mm.