reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Indexable Face Mill, M660 Series, High Speed Steel, 6.40mm Depth Of Cut

About The 00mm, ANSI Code 12396205800, Compatible Hardware Insert Screw M4.Indexable Profiling End Mill, Max. 173.40mm, Overall Length 63

Cutting Dia. Indexable Profiling End Mill, Max. 173.30mm, Depth of Cut 6.40mm, Overall Length 63.00mm, ANSI Code 12396205800, Compatible Hardware Insert Screw M4.5x0.75 x 11 T20, Coolant Fed Non-Coolant Through, Cutting Application Face Milling, Side and Face Milling

Cutting Tools,End Mills,Indexable End Mills

Indexable Face Mill, M660 Series, High Speed Steel, 6.40mm Depth Of Cut

Cutting Tools,End Mills,Indexable End Mills

Specifications of Indexable Face Mill, M660 Series, High Speed Steel, 6.40mm Depth Of Cut

Category
Instockinstock

Last Updated

Indexable Face Mill, M660 Series, High Speed Steel, 6.40mm Depth Of Cut
More Varieties

Rating :- 9.73 /10
Votes :- 1378
Diamond Turning Insert, Diamond, 3, VNMS, 2, Diamond

Diamond Turning Insert, Diamond, 3, VNMS, 2, Diamond

Diamond Turning Insert, Inscribed Circle 3/8 in, Bright (Uncoated), ANSI Code VNMS332FST, Chip-Breaker Style On One Side, Clearance Angle 0 Degrees.

    • Round Milling Insert,12.00mm,Carbide

    Round Milling Insert,12.00mm,Carbide

    4720 in, RDPX12T3M0SNMM, MM, On One Side, 15 Degrees.Round Milling Insert, Inscribed Circle 0.

    • 3/4 in, Depth of Cut 0.3940 in, ANSI Code VSM490D200Z05S075XN10, Compatible Hardware 3/8 In.-24 x 1 in Socket Head Cap Screw, Anti-Seize Lubricant, Hardware Chave Torx DT-9IP, Insert Screw M3x0.5 x 7.2 IP9, Screw 3/8 In.-24 x 1 in LG Coolant G, Coolant Fed Coolant Through, Cutting Application Face Milling, Side and Face Milling, Side/Shoulder Milling: Square End, Slotting: Square End
    • Grooving Width 0.0570 in, ANSI Code 510116, Coating Process PVD

    Grooving Width 0.0570 in, ANSI Code 510116, Coating Process PVD

    Grooving/Parting Insert Parting and Grooving Insert, Left Hand, Max..

    • TDM Insert Blade,UP(M) D0.3860
    • TDM Insert Blade, UP(M) D14.40MM

    TDM Insert Blade, UP(M) D14.40MM

    Replaceable Drill Tip, TiAlN.

    • Boring Bar,9/32,Carbide
    • Cutting Dia.

    Cutting Dia.

    75 x 11 T20, Coolant Fed Non-Coolant Through, Cutting Application Face Milling, Side and Face Milling Indexable Profiling End Mill, Max..

    • Boring Bar,9/32,Carbide

    Boring Bar,9/32,Carbide

    Boring Bar, Boring, Bright (Uncoated), 0.0420 in.

    • Cutting Dia.

    Cutting Dia.

    75 x 11 T20, Coolant Fed Non-Coolant Through, Cutting Application Face Milling, Side and Face Milling Indexable Profiling End Mill, Max.5x0.