Natural Rubber Latex Coated Gloves, Palm Coverage, Blue/Gray, M, PR

Dock Plate, Aluminum, Load Capacity 3,000 lb, Overall Length 30 in, Overall Width 36 in, Usable Width 34 in, Service Height Range 4 in, Raised Diamond Shape Non-Skid Embossing Deck, Thickness 11/32 in, Side Rail Height Not Applicable.

002 in Stainless Steel Shims, Package Quantity 3.Shim Set, Series Exair, Compatible with Grainger Part Number 4LCC1, 4LCC2, Product Type Super Air Knife Shim Set, Compatible with Manufacturer Part Number 110003SS, 110203SS, Compatible with Series Exair, Compatible with Brand Exair, Includes 0.

Basting Spoon, Color Silver, Coated Handle No, Head Design Solid, Overall Length 18 in, Material Stainless Steel, Product Type Basting Spoon, NSF Certified Yes.

Wedge Anchor, System of Measurement Inch, Anchor Diameter 1/4 in, Thread Size 1/4 In.-20, Overall Length 2 1/4 in, Thread Length 1 3/8 in, Eyelet Hole Size Not Applicable, Material Steel, Material Grade/Class Grade 2, Finish Zinc Plated, Compatible Material Concrete, Drill Bit Size 1/4 in, Minimum Installation Depth 1 1/8 in, Minimum Material Thickness 4 in, Ultimate Shear Strength (4,000 psi Concrete) 1,472 lb, Ultimate Tension Strength (4,000 psi Concrete) 1,015 lb, Nut Width 0.

5 gpm, Seal Type Lip, Shaft Length 2 5/8 in, Seal Material Viton, Gear Design Spur.9 ft, Operating Pressure - Maximum 100 psi, Operating Temperature - Maximum 280 Degrees F, Operating Temperature - Minimum 32 Degrees F, Required Horsepower 1 1/2 hp, Connection Size 3/8 in, Connection Type NPT, Shaft Outer Diameter 5/8 in, Flow Rate @ 100 psi 6.

Temperature Alarm, -10 Degrees to 80 Degrees F, Alarm Style Audible, Adjustable Adjustable, Number of Set Points Single Point, Battery, NO, Audible Alarm Volume 70 dB, Cable Length 6 ft, Mounting Location Surface Mount, 9V Alkaline.

Coated Gloves, ANSI/ISEA Abrasion Level 2, Insulated No, Glove Coating Cover Palm, 1 Pair.

Blower Wheel, Product Type Blower Wheel, Wheel Type Forward-Curved, Number of Inlets 2, Wheel Diameter 6 3/4 in, Wheel Width 8 1/4 in, Bore Diameter 1/2 in, Wheel Material Steel, Rotation CW Hub End, Hub Type Convex, Wheel Hub Position Center, Wheel Construction Tabbed, Maximum Speed 1,700 RPM, Drive Type Direct Drive, Includes Set Screws Yes, Wheel Material Finish Galvanized.

Coated Gloves, ANSI/ISEA Abrasion Level 2, Insulated No, Glove Coating Cover Palm, 1 Pair.

Blower Wheel, Product Type Blower Wheel, Wheel Type Forward-Curved, Number of Inlets 2, Wheel Diameter 6 3/4 in, Wheel Width 8 1/4 in, Bore Diameter 1/2 in, Wheel Material Steel, Rotation CW Hub End, Hub Type Convex, Wheel Hub Position Center, Wheel Construction Tabbed, Maximum Speed 1,700 RPM, Drive Type Direct Drive, Includes Set Screws Yes, Wheel Material Finish Galvanized.