2-13/32 W X 11/64 H Plain Pivot Hinge

Concrete Anchor Screw, Anchor Diameter 1/4 in, Overall Length 1 1/4 in, Head Type Flat, Drive Type Phillips, Material Stainless Steel, Material Grade/Class 410, Removable Removable, Compatible Material Concrete, Drill Bit Size 3/16 in, Screw Anchor Type Concrete Screw Anchor, System of Measurement Inch, Maximum Material Thickness 1/4 in, Maximum Ultimate Shear Strength 760 lb, Maximum Ultimate Tension Strength 600 lb, Minimum Installation Depth 1 in, Body Length 1 1/4 in, Package Quantity 100.

Screw Anchor, Anchor Diameter 1/2 in, Overall Length 3 in, Head Type Hex, Drive Type External Hex, Material Steel, Finish Zinc Plated, Material Grade/Class Case Hardened, Removable Removable, Compatible Material Concrete, Drill Bit Size 1/2 in, Screw Anchor Type Concrete Screw Anchor, System of Measurement Inch, Maximum Material Thickness 3/4 in, Maximum Ultimate Shear Strength 9,070 lb, Maximum Ultimate Tension Strength 4,758 lb, Minimum Installation Depth 2 in, Body Length 3 in.

Automotive Air Filter, Air Filter Type - Automotive Engine Air Filter, Air Filter Design Round, Element Only - Automotive Filters No, Height 18 in, Width 12 3/4 in, Length 18 in, Outside Dia.

7 in, Overall Width 6.IEC Magnetic Contactor, Auxiliary Contact Form Auxiliary Contacts Not Included, NEMA Enclosure Rating No Enclosure, NEMA Size Not Applicable, Coil Voltage 480/500V AC, Number of Poles 4, Full Load Current - Inductive 115 A, Full Load Current - Resistive 200 A, Reversing Capability Non-Reversing, Overall Height 6.42 in, Terminal Connection Type Screw Terminals, Frame Size G, Mounting Style DIN Rail, Panel, Series XT, Number of Auxillary Contacts 0, Contactor Style IEC.

Recessed Pull Handle, Load Rated (Y/N) N, Mounting Type Snap-In, Material Stainless Steel, Finish Satin, Mounting Hole Center to Center Not Applicable, Projection 5/16 in, Grip Thickness Not Applicable, Overall Length 1 5/8 in, Overall Width 15/16 in, Grip Length 3 29/32 in, Color Black, Degree Offset Not Applicable, Hardware Not Included, Standards NSF Certified, RoHS Compliant.

Reducing Tee, Malleable Iron, Galvanized, Class Class 150, For Pipe Schedule 40, 1 in, Female, NPT, 3/4 in, Female, NPT, 1 in, Female, NPT, 300 psi @ 150 Degrees F Maximum Operating Pressure.

079 in Door Leaf Thickness, 0.Pivot Hinge, Stainless Steel Material, Stainless Steel Finish, 5 7/10 lb Load Capacity, With Holes, 3 Holes per Leaf, No Ligature Resistant, 270 Degrees Range of Motion, Orientation Non Handed, 0.079 in Frame Leaf Thickness, Plain Bearing Type, Square Corners, Not Included Hardware, Weld-On Mounting, 11/16 in Overall Knuckle Height, 5/16 in Pin Dia., Stainless Steel Pin Material, Nonremovable Pin Type, Door Leaf Height 3/16 in, Door Leaf Width 2 3/8 in.

Flush Push Button, 16 mm, Momentary, Type of Operator Flush Button, Basic Material Plastic, Head Material Plastic, Bezel Material Plastic, Color Red, NEMA Rating 13, 4, 4X, IP Rating IP65, Legend Not Applicable, Standards CCC, CSA C22.14, CSA C22.

, Stainless Steel Pin Material, Nonremovable Pin Type, Door Leaf Height 3/16 in, Door Leaf Width 2 3/8 in.079 in Door Leaf Thickness, 0.

14, CSA C22.2 No.Flush Push Button, 16 mm, Momentary, Type of Operator Flush Button, Basic Material Plastic, Head Material Plastic, Bezel Material Plastic, Color Red, NEMA Rating 13, 4, 4X, IP Rating IP65, Legend Not Applicable, Standards CCC, CSA C22.94, EN/IEC 60947-1, EN/IEC 60947-5-1, EN/IEC 60947-5-5, GOST, IEC 60068-2-27, IEC 60068-2-6, IEC 60529, JIS C852, JIS C8201-1, JIS C8201-5-1, REACH Free of SVHC, RoHS, UL Listed, UL 508, Features Spring Return Mechanism.