Keyway Broaching Toolholder, Long, 32 Mm Shank Diameter, 3 Mm
About The pre-drilling -Diametermin: 8.36 mm Screw: 290399 1. 290397 and a dial indicator to check the spindle orientation. 290391, 290393 for exact setting of the Y-coordinate
In such cases, where possible, always use the optimum combination of holder and cutting insert identical size for maximum stability. For machining Centers, use the alignment aid No. For lathes without Y-axis, please use eccentric bush No. Attention: Always use the minimum pre-drill Diameter to match the slot width e.g. Note: Individual holder sizes are for different slot widths. pre-drilling -Diametermin: 8.36 mm Screw: 290399 1 for slot width 14 mm, minimum pre-drill Diameter = 38.22 mm. 290391, 290393 for exact setting of the Y-coordinate. Through-coolant: yes Shank length Ls: 100 mm suitable for slot width m: 3 mm Reach L1: 40 mm Tool holder Diameter1: 7.8 mm Center offset L3: 4.2 mm Min. 290397 and a dial indicator to check the spindle orientation.
Cutting Tools,Broaches,Broach Holders
Keyway Broaching Toolholder, Long, 32 Mm Shank Diameter, 3 Mm
Cutting Tools,Broaches,Broach Holders
Specifications of Keyway Broaching Toolholder, Long, 32 Mm Shank Diameter, 3 Mm | |
|---|---|
| Category | |
| Instock | instock |
