reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Diabolo Solid Carbide Micro End Mill For Hard Steels, TiAlN Coated, 2 X 25 Mm

About The 1xDxap korr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed! e. recess: 25 mm Recess Dia.g: vf = 18000 rpmx fz mm/Zx z Through-coolant: no Tolerance nominal Dia. Recess angle a = 16 Deg

D1 = 0 / -0.01 mm. Tolerances: Neck Dia. Values for: slots milled from solid: ap = 0.05xDxap korr side milling: ap = 0.1xDxap korr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed! of teeth Z: 2 Flute length Lc: 3 mm Overhang length L1 incl. Note: At greater tool overhang lengths, use a reduced value for ap! Ds: 4 mm 0 / -0-005 No. Recess angle a = 16 Deg. e.g: vf = 18000 rpmx fz mm/Zx z Through-coolant: no Tolerance nominal Dia. GARANT Diabolo: Special geometry, coating and carbide for hard machining in the high-performance field. recess: 25 mm Recess Dia. of teeth Z: 2 Helix angle: 30 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HA to h5 No. D1: 1.91 mm Overall length L: 60 mm Shank Dia. Suitable even for machining electrolytic copper. Double-relief ground 2 chamfers hollow ground for high-precision hard machining.

Cutting Tools,End Mills,Carbide End Mills

Diabolo Solid Carbide Micro End Mill For Hard Steels, TiAlN Coated, 2 X 25 Mm

Cutting Tools,End Mills,Carbide End Mills

Specifications of Diabolo Solid Carbide Micro End Mill For Hard Steels, TiAlN Coated, 2 X 25 Mm

Category
Instockinstock

Last Updated

Diabolo Solid Carbide Micro End Mill For Hard Steels, TiAlN Coated, 2 X 25 Mm
More Varieties

Rating :- 9.7 /10
Votes :- 1371
Precision ground point.

Precision ground point.

1 mm Reinforced core, bright finish.

    • of teeth Z: 3 Flute length Lc: 32 mm Overhang length L1 incl.
    • is used afterwards.

    is used afterwards.

    Sturdy due to short flutes. Application: Point angle 90 Deg for spot drilling and countersinking in one operation when a drill of smaller Dia..

    • recess: 25 mm Recess Dia.

    recess: 25 mm Recess Dia.

    g: vf = 18000 rpmx fz mm/Zx z No. Tolerances: Corner radius: R1 = ±0.

    • Tolerances: Corner radius: Radius contour = 0 / -0.005 mm.

    Tolerances: Corner radius: Radius contour = 0 / -0.005 mm.

    For the highest demands regarding performance and precision in aluminium materials.

    • Note: Flute length LC = L2 + 1.5 x DC.

    Note: Flute length LC = L2 + 1.5 x DC.

    . Straight major cutting edges and a special flute profile ensure good chip evacuation.Pro Steel Solid Carbide Drill, Plain Shank, TiAlN Coated, 3 mm The robust cutter geometry ensures high-performance drilling with good process reliability. A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and extremely wear-resistant coating.

    • Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    Note: Suitable NC spotting drills No.

    • D1 = 0 / -0.01 mm.

    D1 = 0 / -0.01 mm.

    GARANT Diabolo: Special geometry, coating and carbide for hard machining in the high-performance field.Suitable even for machining electrolytic copper. Diabolo Solid Carbide Micro End Mill for Hard Steels, TiAlN Coated, 2 x 25 mm recess: 25 mm Recess Dia.

    • Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    8 mm Standard core thickness and core taper.

    • D1 = 0 / -0.01 mm.

    D1 = 0 / -0.01 mm.

    1xDxap korr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed! e. Values for: slots milled from solid: ap = 0.Suitable even for machining electrolytic copper.